SMC Networks ZSE30A series User Manual

-35-
No.PS※※-OML0003-J
■[F 7] Power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds with no key operation, it will enter power saving mode.
<Operation>
Press the
or button in function selection mode to display [F 7].
Press the button. Move on to setting of power saving mode.
Press the button to set. Return to function selection mode.
Setting of [F 7] Power saving mode completed
In power saving mode, any key operation will return the normal display. If there is no key operation for 30
seconds, the display will return to power saving mode (only in measurement mode).
In power saving mode, only the decimal points and
indicator LEDs will flash (the LEDs flash only when
the switch is ON).
∗: The indicator LEDs will flash when the switch is ON, but it is not synchronized with the output.
Setting of power saving mode
Press the
or
button to select power saving
mode.

SMC Networks ZSE30A series Specifications

General

Brand	SMC Networks
Model	ZSE30A series
Category	Switch
Language	English