25
PROBLEM POSSIBLE CAUSE REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
The coffee is not hot. • The cups were not pre-
heated.
• The infuser has cooled
down because 2/3 minu-
tes have elapsed since the
last coffee was made.
• Warm the cups by rinsing
them with hot water.
• Before making coffee,
heat the infuser by pres-
sing the button (B8)
(fig. 12).).
The coffee is not creamy
enough.
• The coffee is ground too
coarsely.
• Wrong type of coffee
• Turn the grinding adju-
stment knob one click an-
ticlockwise towards "1"
while the coffee mill is in
operation (fig. 11).
• Use a type of coffee for
espresso coffee makers.
The coffee is delivered too
slowly or a drop at a time.
• The coffee is ground too
finely.
• Turn the grinding adju-
stment knob one click an-
ticlockwise towards "7"
while the coffee mill is in
operation (fig. 11).
Continue one click at a
time until coffee delivery
is satisfactory.
The effect is only visible
after delivering two cof-
fees.
To Next Page
Loading...
Need help?
General
