Smeg Lavazza A MODO MIO User Manual

26
ITEN
Fit the supply plug into the power outlet .
Press one of the switch-on/supply buttons to switch
the macchine on.
The coffee machine starts the heating cycle.
The switch-on/supply buttons will start blinking to
a white light.
During the heating cycle, you can book the drink,
pressing one of the switch-on /supply buttons. The
drink will be released after the end of the heating cycle.
The machine will be ready for use when the switch-
on/ supply buttons light up to a steady white light.
At first power-on, supply at least 17.5 oz (0.5 L) of
water without capsule placing a container under the
coffee spout.
Since the machine’s hydraulic circuit is empty, the ma-
chine may automatically make up to five attempts at
supplying, to ensure that the circuit will be filled up.
STAND-BY FUNCTION
In order to ensure energy saving, the machine will be
set to a low-consumption mode after it has not been
used for two minutes, and will be automatically set
to the stand-by mode after it has not been used for
seven more minutes.
The machine can be set to the stand-by mode man-
ually, first of the 9 minutes’ time, by keeping both
buttons pressed down for at least 3 seconds
This mode is indicated by the switching off of the
buttons.
The machine can be reactivated by pressing either
button.
MACHINE SETTING

Smeg Lavazza A MODO MIO Specifications

General

Product type	Capsule coffee machine
Built-in grinder	-
Capacity in cups	1 cups
Coffee input type	Coffee capsule
Coffee maker type	Semi-auto
Appliance placement	Countertop
Water tank capacity	0.9 L
Maximum operating pressure	10 bar
Reservoir for brewed coffee	Cup
Control type	Buttons, Lever
Product color	Cream
Housing material	Plastic, Stainless steel
Removable drip tray	Yes
AC input voltage	220 - 240 V
AC input frequency	50 / 60 Hz
Package depth	447 mm
Package width	238 mm
Package weight	5850 g
Quantity per pack	1 pc(s)
Multi beverage	No

Weight and Dimensions

Depth	370 mm
Width	156 mm
Height	286 mm
Weight	4250 g