Smeg Lavazza A MODO MIO User Manual

27
EN
COFFEE DISPENSING
Make sure that the switch-on/supply buttons lights up
to a steady white light.
To always have a coffee at the perfect temperature, it
is recommended to preheat the cup with hot water.
Position the cup under the dispensing spout without
inserting the capsule. Press one of the switch-on/sup-
ply buttons to supply hot water enough to pre-heat the
cup. Empty the cup.
Place a coffee cup under the dispenser to supply an
ESPRESSO .
Alternatively, place a cup to supply a ESPRESSO
LUNGO .
Lift the capsule loading lever until it locks into posi-
tion to open the capsule fitting compartment.
PREPARING THE COFFEE
Single-dose capsules are prepared to dispense
one coffee/product. DO NOT use the capsules
more than once. Inserting two or more capsules
can cause the machine to malfunction.
Never put fingers or objects in the capsule-holder.
Only Lavazza A MODO MIO or compatible cap-
sule must be inserted into the pod compartment.
Put a capsule into the capsule fitting compartment.
Lower the capsule loading lever to close the capsule
fitting compartment.

Smeg Lavazza A MODO MIO Specifications

General

Product type	Capsule coffee machine
Built-in grinder	-
Capacity in cups	1 cups
Coffee input type	Coffee capsule
Coffee maker type	Semi-auto
Appliance placement	Countertop
Water tank capacity	0.9 L
Maximum operating pressure	10 bar
Reservoir for brewed coffee	Cup
Control type	Buttons, Lever
Product color	Cream
Housing material	Plastic, Stainless steel
Removable drip tray	Yes
AC input voltage	220 - 240 V
AC input frequency	50 / 60 Hz
Package depth	447 mm
Package width	238 mm
Package weight	5850 g
Quantity per pack	1 pc(s)
Multi beverage	No

Weight and Dimensions

Depth	370 mm
Width	156 mm
Height	286 mm
Weight	4250 g