Snap-On TECHANGLE ATECH3F300BN User Manual

13
 AZO-: Gyro Zero Offset at CCW full scale torque
 TFS+: CW Full scale torque ADC value
 TFS-: CCW Full scale torque ADC value
 Copyright
4. Pressing ENTER   button exits Show Info screen and returns to Settings menu.
Setting Sleep Time
This function will allow user to set interval wrench enters power-down state following last applied
torque or button press.
1. From Settings menu, use UP   /DOWN   buttons to highlight SLEEP TIME selection then press
ENTER   button.
2. SLEEP TIME screen is displayed.
3. Use UP   /DOWN   buttons to select sleep interval.
Selectable Intervals:
 2 MIN (factory default)
 5 MIN
 10 MIN
 30 MIN
 1 HR
 2 HR
 8 HR
4. Press ENTER   button to accept selection and exit to Settings menu.
ENTER
button
CAL: 2019/01/01
ISD: 2019/01/01
TCF: 14800
ACF: 1257
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
AZO-: 45
TFS+: 9000
TFS-: -9000
©
201
8
SNAP
-
ON
UP/DOWN buttons
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
ENTER
button
SLEEP TIME
2 MIN
EXIT
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
UP/DOWN buttons
SLEEP TIME
8 HR
EXIT

Snap-On TECHANGLE ATECH3F300BN Specifications

General

Brand	Snap-On
Model	TECHANGLE ATECH3F300BN
Category	Power Tool
Language	English