Snap-On TECHANGLE STEEL MICRO User Manual

7
Note: A maximum of 50 data records can be stored in memory. Memory full icon will be displayed when
full. New data will replace oldest record until memory is cleared.
Deleting Stored Torque and Angle Data
1. From target torque or angle screen, press and hold ENTER   button for 3 seconds.
2. Highlight CLEAR DATA menu selection using UP   /DOWN   buttons then press ENTER  
button to display CLEAR ALL DATA screen.
3. In CLEAR ALL DATA screen, highlight YES menu selection to delete all stored data, or NO menu
selection to exit without deleting data.
4. Press ENTER   button after making selection.
Viewing and Clearing Wrench Cycle Counter
Each time torque or angle target is reached, wrench cycle counter is incremented. Maximum cycle
count is 999999.
1. From target torque or angle screen, press and hold ENTER   button for 3 seconds.
2. Highlight CYCLE COUNT menu selection using UP   /DOWN   buttons.
3. Press ENTER   button to display COUNT screen.
4. To exit CYCLE COUNT screen without clearing count, press ENTER   button while EXIT menu
selection is highlighted.
5. To reset wrench cycle count to 0, highlight CLEAR menu selection then press ENTER   button.
6. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER   button to
return to main menu.
UP/DOWN buttons
ENTER
button
held
Target Screen
ENTER
button
UP/DOWN buttons
00
M 100.0 IN-LB
EXIT
SET HEAD LENGTH
SHOW DATA
EXIT
SET HEAD LENGTH
SHOW DATA
0002: 15:40:15
2017/01/26
TQ: 100.2 IN-LBS
0001: 15:35:05
2017/01/26
100.3 IN-LBS 84°
ENTER
button
held
Target Screen
UP/DOWN buttons
ENTER
button
ENTER
button
00
M 100.0 IN-LB
UP/DOWN buttons
EXIT
SET HEAD LENGTH
SHOW DATA
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
CLEAR ALL DATA
YES
NO
CLEAR ALL DATA
YES
NO
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
ENTER
button
held
Target Screen
UP/DOWN buttons
ENTER
button
00
M 100.0 IN-LB
EXIT
SET HEAD LENGTH
SHOW DATA
UP/DOWN buttons
COUNT: 12
CLEAR
EXIT
COUNT: 0
CLEAR
EXIT
SHOW DATA
CLEAR DATA
CYCLE COUNT
ENTER
button
COUNT: 12
CLEAR
EXIT
ENTER
button
SHOW DATA
CLEAR DATA
CYCLE COUNT
ENTER button

Snap-On TECHANGLE STEEL MICRO Specifications

General

Brand	Snap-On
Model	TECHANGLE STEEL MICRO
Category	Power Tool
Language	English