Snapper 4 Series User Manual

Section 1 - FAMILIARIZATION
CLUTCH
CABLE
COVER
DASH
PANEL
HANDLE_
BRACKET
DEPTH
BAR
HANDLEBAR
WHEEL&TINE
CONTROL BAIL
_WHEEL & TINE
SHIFT LEVER
SHIFT COVER
SPEED CONTROL
LEFT SIDE SHOWN TO
VIEW CHECK PLUG
ENGINE AIR FILTER
CONTROL
MAIN CASE GR
CHECK PLUG
ENGINE
TINE
COVER
DRAG
MAIN CASE
FILL PLUG
O
DRIVE
BELT
GUARD
ENGINE OIL
CHECK/FILL
PLUG
OIL DRAIN
PLUG
TINE
STARTER ROPE,
WEIGHT
BOX
TIRE & WHEEL. TRANSMISSION STAND-UP
CHAIN CASE BAR
FIGURE 1
1.1
INTRODUCTION: This manual covers the recommended operating procedure and routine service
requirements on SNAPPER Intermediate Rear Tine Tiller. It is recommended that all operators of this Tiller
become thoroughly familiar with the controls and proper operation of the unit before operating. Specific
details involving the engine are found in the separate engine owner's manual. Study these manuals before
operating and keep both handy for future reference. Refer to Figure 1 above for location of controls and
other essential components.

Snapper 4 Series Specifications

General

Brand	Snapper
Model	4 Series
Category	Tiller
Language	English