RS232 Conf
(1)
:
D e v i c e T y p e < S E >
P r o t o c o l < G S M >
S e t A P N
S e t M o d e m T y p e
S e t U s e r N a m e
S e t P a s s w o r d
GPIO Conf:
D e v i c e T y p e < R R C R >
Power Control
Power control options are detailed in the
Power Control Application Note
, available on
the SolarEdge website at http://www.solaredge.com/files/pdfs/application_note_power_
control_configuration.pdf.
The Grid Control option may be disabled. Enabling it opens additional
options in the menu.
The Energy Manager option is used for setting power export limitation,
as described in the
Export Limitation Application Note
, available on the
SolarEdge website at http://www.solaredge.com/files/pdfs/products/feed-in_
limitation_application_note.pdf.
For P(Q) diagram refer to
https://www.solaredge.com/sites/default/files/application_note_p_q_diagram_of_
se_inverters_en_and_na.pdf
NOTE
SolarEdge inverters with “Grid Support” functionality (as marked on the
inverter certification label), are compliant with UL1741 Supplement A. The
functionality is built into the inverter and no additional external device is
required.
Display
Select Display to set the following:
(1)
When using the SolarEdge GSM products this menu is unavailable.
-Three Phase System Installation Guide MAN-01-00057-4.1
54 Configuration Menu Options
To Next Page
Loading...
Need help?
General