EasyManuals Logo
Home>Sony>Blu-ray Player>BDP-S350

Sony BDP-S350 User Manual

Sony BDP-S350
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
50
Network Settings
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
1 Select “Internet Settings” in “Network
Settings,” and press ENTER.
2 Select “IP Address Acquisition,” and
press ENTER.
3 Select an item, and press ENTER.
When you select “Use DHCP”
If you set “DNS Server Auto
Acquisition” to “Off,” set the following
item:
DNS Server (Primary)/DNS Server
(Secondary)
When you select “Use Static IP
Address”
Set the following items:
IP Address
Subnet Mask
Default Gateway
DNS Server (Primary)/DNS Server
(Secondary)
b
When you set the “DNS Server (Primary)”/
“DNS Server (Secondary)” addresses
manually, enter the “DNS Server (Primary)”
address. Otherwise, the “Internet Settings
will be set incorrectly.
4 If your ISP has a specific proxy server
setting, select “Proxy Settings” using
M/m, and press ENTER.
The “Proxy Settings” display appears.
If the proxy server does not have a
specific setting, go to step 8.
5 Set “Use of Proxy Server” to “On.”
6 Select “Proxy Server” and “Port,” and
enter the settings.
To enter the proxy server, see “To enter
characters” (page 51).
7 Press RETURN.
8 Select “Network Diagnostic” using M/
m, and press ENTER.
9 Select “Start,” and press ENTER.
10
Check that the message “Network
connections are correct.” appears.
The setup is finished. If the message does
not appear, follow the on-screen
messages.
Internet Settings
Use DHCP Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static IP
Address
Set the IP address
manually according to
your network
environment.

Table of Contents

Other manuals for Sony BDP-S350

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony BDP-S350 and is the answer not in the manual?

Sony BDP-S350 Specifications

General IconGeneral
Depth220 mm
Width430 mm
Height60 mm
Weight2900 g
Child lockYes
Aspect ratio16:9
Product colorBlack, Blue
Audio decodersDolby TrueHD, DTS-HD
Playback modesNormal, Slideshow
DVD region code2
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Blu-ray region codeB
Composite video out1
Disc types supportedBD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Supported video modes1080p
Card reader integratedNo
USB 2.0 ports quantity0
Power consumption (standby)03 W
Power consumption (typical)26 W
Audio output channels7.1 channels

Related product manuals