8
GB
Preventing the TV from
toppling over
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (not supplied)
into the screw hole of the TV.
For KDL-60/52/40NX800, KDL-46/
40NX700
Use M4 × 16 screw
For KDL-60/55NX815, KDL-60/
55NX810, KDL-46/40NX710
Use M4 × 8 screw
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
z
• An optional Sony support belt kit is used to secure
the TV. Contact your nearest Sony service centre
to purchase a kit. Have your TV model name
ready for reference.
Bundling the cables
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
• A cable holder is available for KDL-52/40NX800
and KDL-46/40NX700. To bundle the cables,
follow steps 3 to 5.
For KDL-60/52/40NX800, KDL-46/
40NX700
For KDL-60/55NX815, KDL-60/55NX810,
KDL-46/40NX710
* KDL-60/52/40NX800 only
*
To Next Page
Loading...
Need help?
General