73
Advanced operations
INDEX 00
SCAN
INDEX 00
SCAN
1
2
INDEX
REW FF
Scanning the beginning of each marking position – index scan
(1) Press INDEX on the Remote Commander during normal playback.
(2) Press 0 or ). The tape rewinds or advances rapidly and plays back for
approximately 10 seconds from the point on which the index signal was
marked. If you want to continue playback, press (. When you do not press
any button, the tape is automatically scanned to the next program.
To cancel index scan mode
Press (. Normal playback resumes.
Locating the marking position
To Next Page
Loading...
Need help?
General