74
1212
[a]
[b]
3
INDEX
INDEX
REW
FF
INDEX 00
SCAN
INDEX 02
SEARCH
1
2
Locating the marking position
Locating the desired marking position – index search
(1) Press INDEX on the Remote Commander during stop or playback mode.
(2) Press INDEX repeatedly until the index number of the desired program is
displayed in the viewfinder or on the LCD screen.
(3) Press 0 or ). Playback starts from the beginning of the desired program.
[a] the current position
[b] the INDEX number
To stop index search mode
Press (. Normal playback resumes.
Note on the index number
The index number (1, 2, etc.) indicates the distance from the point you are now viewing
[a], regardless of the direction.
To Next Page
Loading...
Need help?
General