EasyManuals Logo

Sony DR-BTN200 Help Guide

Sony DR-BTN200
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Status
Approx. usage
hours
Communication time (including music playback time) (up
to)
40 hours
Standby time (up to) 800 hours
The communication time will be about 24 hours when it is charged for 2 hours.
Time stated above may vary, depending on ambient temperature or conditions of
use.
Checking the remaining battery
If you press the POWER button while the headset is turned on, the indicator (red)
flashes. You can check the remaining battery by the number of times the indicator
(red) flashes. The indicator (red) flashes immediately after the headset is turned on
to indicate the remaining battery power.
Indicator (red) Status
3 times Full
2 times Mid
1 time Low (needs to charge)
Note
You cannot check the remaining battery during pairing operation.
When the battery is almost empty
The indicator turns red. When the battery becomes empty, the headset sounds a
beep and turns off automatically.
Copyright 2013 Sony Corporation
30

Other manuals for Sony DR-BTN200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony DR-BTN200 and is the answer not in the manual?

Sony DR-BTN200 Specifications

General IconGeneral
Driver typeDynamic
Magnet typeNeodymium
Ear couplingSupraaural
Headphone frequency20 - 20000 Hz
Battery recharge time4.5 h
Continuous audio playback time40 h
BluetoothYes
Bluetooth version3.0+HS
Bluetooth profilesA2DP
Connectivity technologyWireless
Headset typeBinaural
Product typeHeadset
Product colorWhite
Wearing styleHead-band
Operating keysVolume +, Volume -
Recommended usageCalls/Music
Microphone typeBuilt-in
Weight and Dimensions IconWeight and Dimensions
Weight157 g

Related product manuals