To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why is recording not possible on my Sony DSR-2000AP DVR?
Recording may not be possible on your Sony DVR if the cassette's REC/SAVE switch is set to SAVE. To resolve this, set the REC/SAVE switch to REC, or use another cassette. Another reason could be that the REC INHIBIT switch on the subsidiary control panel is set to ON. In this case, set the REC INHIBIT switch on the subsidiary control panel to OFF.
What to do if the Sony DVR unit’s control buttons do not work?
If the control buttons on your Sony DVR unit aren't working, it might be because the KEY INHIBIT switch on the subsidiary control panel is set to ON. Set the KEY INHIBIT switch on the subsidiary control panel to OFF. Alternatively, the CONTROL PANEL switch on the subsidiary control panel may be set to EXT. In this case, set the CONTROL PANEL switch on the subsidiary control panel to INT or set extended menu item 117 to PARA.
General| Display | LCD |
|---|---|
| Video Format | DVCAM |
| Recording Media | DVCAM Tape |
| Audio Channels | 4 channels |
| Audio Format | 16-bit PCM |
| Video Input | Composite, S-Video, Component |
| Video Output | Composite, S-Video, Component |
| Control Interface | RS-422 |
| Recording Time | Up to 184 minutes (DVCAM) |
| Video Signal System | NTSC |
| Input/Output Connectors | BNC, XLR, RCA |
