Help Guide
Wireless Microphone
ECM-W2BT
Attaching the receiver to a camera
Attach the receiver to a camera.
Note
Before attaching the receiver to the camera, charge the receiver's built-in battery sufficiently enough.
Before attaching/removing the receiver to/from the camera, be sure to turn off the receiver and the camera.
To remove the receiver
Slide the receiver in the opposite direction to when attaching.
Related Topic
Charging the receiver
5-026-023-11(1) Copyright 2021 Sony Corporation
Align the Multi Interface foot of the receiver with the Multi Interface Shoe on the camera and attach the
receiver.
Note
Firmly insert the receiver all the way into the Multi Interface Shoe of the camera.
If the built-in flash on the camera is popped up, put it down.
1
To Next Page
Loading...
Need help?
General
