Help Guide
Wireless Microphone
ECM-W2BT
Lamp indications
The lamp lights, blinks or goes out according to the status of the devices and communication as follows.
Power lamp
LINK lamp
Related Topic
Locating parts and controls
5-026-023-11(1) Copyright 2021 Sony Corporation
State Receiver Microphone
The power has just been turned on. Lights up in green Lights up in green
Connection is established and sound can be recorded clearly. Lights up in green Lights up in green
The receiver is turned off. Goes out Lights up in green
The microphone is turned off. Lights up in green Goes out
Audio is interrupted due to bad communication conditions. Lights up in green Lights up in green
The built-in battery is running out of power. Blinks in orange Blinks in orange
Battery charging is in progress while the power is turned off. Lights up in orange Lights up in orange
State Receiver Microphone
The power has just been turned on.
Blinks in blue slowly (standby
mode)
*1 *2
Blinks in blue slowly (standby
mode)
*1 *2
Connection is established and sound can be
recorded clearly.
Lights up in blue Lights up in blue
The receiver is turned off. Goes out
Blinks in blue slowly (standby
mode)
*1
The microphone is turned off.
Blinks in blue slowly (standby
mode)
*1 *2
Goes out
Audio is interrupted due to bad communication
conditions.
Blinks in blue quickly Blinks in blue quickly
Battery charging is in progress while the power
is turned off.
Goes out Goes out
When this state continues for 5 minutes, the auto power-off function is activated. Turn off the power, and then turn it back on.
*1
While the receiver is in RCVR mode, the auto power-off function is disabled.
*2
To Next Page
Loading...
Need help?
General
