21
E:\SONY\2659814111\01GB02GET_E.fm
DCR-HC36E/HC44E/HC46E/HC94E/HC96E
2-659-814-11(1)
Getting Started
You can use only a “Memory Stick Duo”
marked with or
(p. 119).
• The number and time of recordable pictures
varies depending on the image quality or the
image size. For details, see page 52.
1 Open the LCD panel.
2 Insert the “Memory Stick Duo”
into the “Memory Stick Duo” slot
in the right direction until it clicks.
DCR-HC94E/HC96E:
DCR-HC36E/HC44E/HC46E:
• If you force the “Memory Stick Duo” into
the slot in the wrong direction, the “Memory
Stick Duo,” the “Memory Stick Duo” slot,
or image data may be damaged.
To eject a “Memory Stick Duo”
Lightly push in once and slide out the
“Memory Stick Duo” alongside the
camcorder body.
• Do not remove the “Memory Stick Duo”
forcibly with the fingers as it may be damaged.
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• When inserting or ejecting the “Memory Stick
Duo,” be careful that the “Memory Stick Duo”
does not pop out and drop.
“Memory Stick Duo”
Access lamp
With the v mark facing to
the LCD screen
Access lamp
With the v mark facing to
the LCD screen
To Next Page
Loading...
Need help?
General