Warningindicators
If indicators appear on the LCD screen, check
the following.
You can solve so}me of tile sympton> by
yourself. If your proNem persists even after
you have tried a couple of times, contact your
Sony dealer or local authorized Sony service
facility.
C:04:00
C:(or E:) DD:DD (Self-diagnosis
display)
C:04:r-lr-I
• The battery pack is not an
"InfoLITHIUM" batte U pack. Use an
"InlbLITHIUM"battery pack (p.10).
• Connect the DC plug of the AC Adaptor
to the DC IN.jack of the Handycam
Station or your camcorder securely
(p. 10).
C:13:rqrq / C:32:rqD
• Remove the lX)WCrsource. Reconnect it
and operate your camcorder again.
E:20:r-IN / E:31 :r-lr-I / E:40:r-IN /
E:61 :r-wI / E:62:r-lr-I / E:91 :r-wI /
E:g4:r-wI
• A malflmction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service l.cility.
lnfornl them of the 5-digit code, which
starts from "E'.
100-0001 (Warning indicator
pertaining to files)
Slow flashing
• The tile is damaged.
• The file is unreadable.
_ (Warning on the hard disk of the
camcorder)*
Fast flashing
• An em)r mayh:l_coccurred _ iththchard
disk drive ill your camcorder.
___-_(Warning on the hard disk of the
camcorder)*
Fast flashing
• The hard disk of the camcorder is fully
recorded.
• An em)r may have occurred with thehard
disk drive ill your camcorder.
&\_ (Battery level warning)
Slow flashing
• The batlery pack is nearly used up. ="
• Depending on the operating
envirolnnent or ballery condilions, c\_ ,_
may flash, even if there arc
approximately 20 minutes remaining.
rF1
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while ill a cool place.
Fast flashing*
• The temperature of your camcorder is
extremely high. Turn offyour camcorder
and leave it lk)ra while ill a cool place.
(Low temperature warning)
Fast flashing*
• The temperature of your camcorder is
extremely low. Make the camcorder
warm.
[bl
29
To Next Page
Loading...
Need help?
General