Onhandlingthecasing
• If the casing is soiled, clean the camcorder body
with a sol_ cloth lightly moistened with water, and
lhen wipe the casing with a dly soil clolh.
• Avoid the lollowings to prexenl damage to tile
finish.
Using chemicals such as lhinner, benzine,
alcohol, chemical cloths, repellenl and
insecticide and sunscreen.
Handlingwitb abovesubstancesonyour hands.
Leaving the casing ill contact with lubber or
vinyl objects lot along periodof time,
Careandstorageolthecameralens
• Wipe the sln'lace of the lens clean with a soil clotll
in tile following instances:
when thereare fingerprinls on tbe lens surlace,
ill hot or humM localions
when the lens isexposed 1osalty air suchas at
the seaside.
• Storethe lensin awell-venlilatedIocalionsuI_iect
1olittle dirt or dusl,
• To preventmold, periodically clean the lens as
described above. It is recommended tbl you
operate your catncorder about once a lnonlh lo
keeI) it illoplimum state lot a long time.
To charge the pre-installed
rechargeable battery
Your camcoMer has a pre-installed
rechargeable battery to retain the date. time.
and other settings even when the POWER
switch is setto OFF (CHG). Thepre-iustalled
rechargeable battery is always charged while
you are using your camcorder but it will get
discharged gradually if you do not use your
camcorder. The rechargeable battery will be
fully discharged in about 3 months if you
do not use your camcorder at all. However.
even if the predustalled rechargeable battery
is not charged, the camcorder operation will
not be affected as long as you are not
recording the date.
N Procedures
Couuect VO/lr caulcorder to a "_xall outlet
using the AC Adaptor supplied with your
camcorder, and leave your camcorder with
the POWER switch turned off for more than
24 hours.
32
To Next Page
Loading...
Need help?
General