27
GB
When you play content on a device (Blu-
ray Disc player, “PlayStation
®
4,” etc.)
connected to the TV, the Sound Bar and
TV are turned on automatically, the
input of the Sound Bar is switched to TV
input, and sound is output from the
speakers of the Sound Bar.
• If the TV sound was output from the
speakers of the TV the previous time you
watched the TV, the Sound Bar may not
turn on and the sound and picture may be
output from the TV even if device content
is played.
• Depending on the TV, the beginning part
of content being played may not play
correctly.
Using the “BRAVIA” Sync
Function
In addition to the Control for HDMI
function, you can also use the “BRAVIA”
sync function such as the Sound mode/
Scene Select function.
This function is proprietary function of
Sony. This function cannot operate with
products other than those manufactured
by Sony.
The sound mode of the Sound Bar is
automatically switched according to the
setting of the TV’s Scene Select function
or sound mode. For details, refer to the
operating instructions of your TV.
Set the sound mode to AUTO SOUND
(page 20).
One-Touch Play Function
Notes
Note
Sound mode/Scene Select
Function
To Next Page
Loading...
Need help?
General
Weight and Dimensions
