Sony HT-ST5000 User Manual

22
GB
Mounting the Main Unit
on a Wall
You can mount the main unit on a wall.
• Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely in the wall beam. Install the
speakers horizontally, hung by screws in
studs in a continuous flat section of the
wall.
• Have the installation done by a Sony
dealer or licensed contractor and pay
special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
disaster, etc.
The main unit outputs the surround
sound toward the ceiling.
To ensure that the TV does not interfere
with the output sound from the main
unit, decide on the installation location
of the main unit by referring to the
following estimated values.
Notes
About the Installation
Location of the Main Unit
Depth of the
mounted TV
(A)
Dimensions to the
main unit from the
TV
(B)
Less than 66 mm 50 mm or more
66 mm to less than
100 mm
100 mm or more
100 mm or more 200 mm or more
Main unit
TV
(A)
(B)

Sony HT-ST5000 Specifications

General

Audio decoders	Dolby Atmos, Dolby Digital, Dolby Dual Mono
RMS rated power	- W
Audio output channels	7.1.2 channels
Soundbar speaker RMS power	90 W
Subwoofer included	Yes
Subwoofer connectivity	Wireless
Receiver included	-
Product color	Black
Bluetooth profiles	A2DP, AVRCP
HDMI in	3
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.5 W
Power consumption (typical)	7 W

Weight and Dimensions

Depth	145 mm
Width	1180 mm
Height	80 mm
Soundbar weight	8200 g
Subwoofer depth	426 mm
Subwoofer width	248 mm
Subwoofer height	403 mm
Subwoofer weight	14100 g