30
Images recorded with HD (high definition) quality are converted to SD (standard definition)
and played back. Images recorded with SD (standard definition) image quality are played back
with SD (standard definition) image quality.
To set the horizontal to vertical ratio according to the connected TV (16:9/4:3)
Set [TV TYPE] to [16:9] or [4:3] according to your TV (p. 55).
b Notes
• When you play back a movie recorded with SD (standard definition) image quality on a 4:3 TV that is not
compatible with the 16:9 signal, touch (HOME) t (SETTINGS) t [MOVIE SETTINGS] t
[WIDE SELECT] t [4:3] on your camcorder when recording an image (p. 49).
• Use an HDMI cable with the HDMI logo.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the images.
• Some TVs may not function correctly (e.g., no sound or image) with this connection.
• Do not connect the HDMI OUT jack of your camcorder and HDMI OUT jack of the external device with
the HDMI cable. This may cause a malfunction.
• HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
Connecting to a non-high-definition 16:9 (wide) TV or 4:3 TV
: Signal flow
Type Camcorder Cable TV HOME MENU setting
HDMI cable (sold separately)
t (p. 31) t (p. 31)t (p. 31)
To Next Page
Loading...
Need help?
General