Sony MEX-BT4000P User Manual

2
Rotate
the
control dial
until
"DEMO,
appears,
then
press it.
3
Rotate
the
control dial
to
select
"DEMO-OFF,,
then
press it.
The setting
is
complete.
4
Press~
(BACK).
The display returns to normal reception/
play mode.
The clock uses a 12-hour digital indication.
1
Press
and
hold
the
select
button.
The setup display appears.
2
Rotate
the
control dial
until
"CLOCK-
AD}'' appears,
then
press it.
The hour indication flashes.
3
Rotate
the
control dial
to
set
the
hour
and
minute.
To move the digital indication, press
(SEEK)-/+.
4
After
setting
the
minute,
press
the
select
button.
The setup
is
complete and the clock
starts.
To display the clock, press (
DSPL).
You can detach the front panel
of
this unit
to prevent theft.
1
Press
and
hold
(SOURCE/OFF)
G).
The unit
is
turned
off.
2
Press
the
front
panel
release
button
®,
then
remove
the
panel
by
pulling
it
towards you.
Caution alarm
If
you
turn
the ignition switch to the
OFF
position without detaching
the
front panel,
the caution alarm will
sound
for a
few
seconds. The alarm will only
sound
if
the
built-in amplifier
is
used.
I~MM
Do not subject the front panel to heat/high
temperature
or
moisture. A void leaving it
in
a
parked car
or
on a dashboard/rear tray.
Attaching the front
panel
Engage part
@
of
the front panel with part
@
of
the unit,
as
illustrated,
and
push the
left side into position until it clicks.
7

Sony MEX-BT4000P Specifications

General

Brand	Sony
Model	MEX-BT4000P
Category	Car Receiver
Language	English