Sony MEX-BT4000P User Manual

Start up effect
-
Start White
In the Start White setting, when you press
(SOURCE/OFF), the display and buttons
on the main unit turn white once, then
change to the customized color.
1 Press and hold the select button.
The setup display appears.
2 Rotate the control dial until "START-
WHT, appears, then press it.
3 Rotate the control dial to select
"WHITE-ON,, then press it.
4 Press ~ (BACK).
To cancel Start White, select
((OFF" in step
3.
Connecting
Bluetooth devices
The Bluetooth function allows for handsfree
calling
and music streaming via this unit.
To use the Bluetooth function, the following
procedure
is necessary.
0Pairing
When connecting Bluetooth devices for
the first time, mutual registration
is
required. This is called ((pairing."
Registration
is required only for the first
time, as this unit and the other devices
will recognize each other automatically
thereafter.
8 Connection
To use the device after pairing is made,
start the connection. Sometimes pairing
allows for connection automatically.
8 Handsfree calling/Music streaming
You can talk handsfree and listen to
music when the connection
is made.
If pairing is not possible, your device may
not be compatible with this unit. For details
on compatible devices, visit the support site
on the back cover.
Installing the microphone
To capture your voice during handsfree
calling, you need to install the microphone
(supplied).
For details
on how to connect the
microphone, refer to the supplied
((Installation/Connections" guide.
21

Sony MEX-BT4000P Specifications

General

Brand	Sony
Model	MEX-BT4000P
Category	Car Receiver
Language	English