User's manual Sony Personal Navigation System
- 80 - Settings
Signpost information
Signpost information On the SIGNPOST INFORMATION screen, you may effect the
following modifications:
The Show traffic signs command indicates whether signposts
indicating exits from motorways or highways are currently being
displayed or not.
Tap the Show traffic signs command to toggle between On and
Off mode.
The new mode is now indicated on the button.
Note: This information can only be displayed when it is contained
in the cartographic material.
Light sensor
Light sensor Your device has a light sensor. When it becomes too dark, it can
switch the screen of your device to night mode. (Refer to the
next chapter)
You can adjust the sensitivity of the light sensor in the L
IGHT
SENSOR
screen.
Tap on the Sensitivity button and choose from high, medium
or low.
The higher the sensitivity, the sooner the screen will switch over
to night mode.
Screen setting
Screen setting On the SCREEN SETTING screen, you may effect the following
modifications:
Setting Signification
Map view
Set whether you want the map view to be
day or night. Auto automatically changes
the view as soon as the light sensor reacts.
(Refer to previous chapter)
Brightness
Set whether you want the day or night
brightness setting. Auto automatically
changes the brightness as soon as the light
sensor reacts. (Refer to previous chapter)
Brightness day Select the brightness - day. (1-8)
Brightness night Select the brightness - night. (1-8)
To Next Page
Loading...
Need help?
General
