186
GB
Table of
contents
Sample photo Menu Index
The exposure value is flashing on the LCD screen or the viewfinder.
• The subject is too bright or too dark for the metering range of the camera.
The self-timer lamp does not flash.
• When the LCD screen is tilted upward about 180 degrees with [Self-portrait Self-timer] set to [On],
the self-timer lamp does not flash.
Images cannot be played back.
• The folder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded using a
model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection (page 177).
• Use “PlayMemories Home” to play images stored on a computer with this camera.
The image cannot be deleted.
• Cancel the protection (page 104).
The image was deleted by mistake.
• Once you have deleted an image, you cannot restore it. We recommend that you protect images that
you do not want to delete (page 104).
A DPOF mark cannot be put.
• You cannot mark DPOF marks on RAW images.
Not sure if the OS of the computer is compatible with the camera.
• Check “Recommended computer environment” (page 171).
The computer does not recognize the camera.
• Check that the camera is turned on.
• When the battery level is low, install the charged battery pack, or use the AC Adaptor (sold
separately).
• Use the USB cable (supplied) for connection.
• Disconnect the USB cable, and connect it again firmly.
• Set [USB Connection] to [Mass Storage] (page 155).
• Disconnect all equipment other than the camera, the keyboard and the mouse from the USB terminals
of your computer.
• Connect the camera directly to your computer without passing through a USB hub or other device.
Cannot copy images.
• Make the USB connection by properly connecting the camera with your computer (page 176).
• Follow the designated copy procedure for your OS.
Viewing images
Deleting/Editing images
Computers
Continued r
To Next Page
Loading...
Need help?
General
