70
GB
Table of
contents
Sample photo Menu Index
Object Tracking
Keeps the focusing on a moving subject while tracking it.
• Tracking may be difficult in the following situations:
– The subject is moving too quickly.
– The subject is too small, or too large.
– The contrast between the subject and the background is poor.
– It is dark.
– The ambient light changes.
• When [Object Tracking] is activated, the custom setting of soft key B is invalid.
• You cannot use [Object Tracking] with the following functions:
– [Hand-held Twilight] in [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
– [3D Sweep Panorama]
–[Manual Focus]
– The [Zoom] feature of the camera
1 MENU t [Camera] t [Object Tracking].
A target frame appears.
2 Align the target frame with the subject to be
tracked, and select OK.
The camera starts tracking the subject.
To cancel this tracking feature, select .
3 Shoot the subject.
Target frame
Notes
z Tracking the face you want to shoot
The camera stops tracking a subject when the subject moves off of the screen. When [Face
Detection] is set to [On], and the subject to be tracked is a face, if the face disappears from
the screen while the camera is tracking, and then returns to the screen, the camera focuses on
that face again.
• If you trigger Smile Shutter while tracking a face, the face becomes the target of the smile
detection feature.
• If you set [Object Tracking] to [On], the camera can track the body when the face is not
visible on the LCD screen.
To Next Page
Loading...
Need help?
General
