7
GB
Make sure you’ve hooked up the tuner and preset stations.
(See pages 4 - 6 for hookups and page 6 or 11 for presetting.)
Turn on the amplifier and select the TUNER mode.
Press POWER to turn on the tuner.
Press SHIFT to select A, B, or C.
Press the preset number you want (1 - 0).
Receiving Preset Stations
This section shows you how to receive preset stations.
To check broadcasts by scanning the preset stations
5
3
2
1
4
• To tune in a non-preset
station, see “Receiving
Broadcasts” on page 9.
Basic Operations
POWER
S
Advanced Reception Circuit
AUTO-BETICAL
SELECT
MEMORY FM MODE BAND
TA NEWS/INFO PTY DISPLAY
EON
SHIFT 1 2 3 4 5 6 7 8 9 0 DIRECT
ASM ANTENNA
MENU RETURN
CHARACTER TUNE MODE
TUNING/ SELECT
ENTER
FM STEREO/FM-AM TUNER ST-SE700
3
45
1Press TUNE MODE repeatedly so that “PRESET” appears in the display.
2 Turn TUNING/SELECT.
Each time you turn TUNING/SELECT, a preset station is received and
the settings (preset code, frequency, and station name, etc.) appear in the
display. The signal meter indicates the strength of the broadcast signal.
0 DIRECT
ASM ANTENNA
MENU RETURN
CHARACTER TUNE MODE
TUNING/ SELECT
ENTER
FM STEREO/FM-AM TUNER ST-SE700
TUNING/SELECT
TUNE MODE
To Next Page
Loading...
Need help?
General
