24
GB
Operating Non-Preset
Components
— Learning Function (continued)
3 Press the Jog dial again.
“DEL OK” appears in the
display, and the component
name flashes again.
Note
In some cases, a processing
indicator (see Notes on page 22)
might appear in the display. Wait
until this indicator disappears.
4 Select “EXIT,” then press
the Jog dial to finish
erasing.
To exit SET mode, press SET.
Advanced Features
Changing the
Component Selection
Order (MOVE)
At the factory, the Commander is
preset to change the component in
the following order. However, you
can change the order as you like.
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial.
ELD
OK
ARNLE
-3S
R
ARNLE
CV
TV
SAT
VCR
DVD
CD
AMP
TAPE
MD
1
Jog
dial
To Next Page
Loading...
Need help?
General
