Sony SA-W11 User Manual

Getting Started
5
EN
Hooking Up the System
Overview
Use the LINE IN jack or the SPEAKER IN terminals of
the woofer when you connect the amplifier.
• If your amplifier has one of the following types of
output jacks, connect the LINE IN jack and the
amplifier's jack using the supplied audio connecting
cord.
— MONO OUT jack
— MIX OUT jack
— SUB WOOFER output jack(s)
— SUPER WOOFER output jack(s)
• If your amplifier does not have the above mentioned
output jacks, connect the speaker terminals of the
amplifier to the SPEAKER IN terminals instead.
LINE IN
SPEAKER IN
LINE
VOLTAGE SELECTOR
SPEAKER
IN OUT
IN
+
+
–
–
+
+
–
–
OUT
L
R
L
R
220-240V
110-120V
Before you get started
• Turn off the power of the amplifier and the woofer
before making any connection.
• Use the audio connecting cords that are supplied to
the respective equipment. If there are not enough
audio connecting cords to make the necessary
connections, you need to purchase some optional
audio connecting cords.
• Be sure to make connections firmly to avoid noise.
• Connect the AC power cord from the woofer to a
wall outlet.
• You cannot connect the CENTER output jack for use
with Dolby Pro Logic function to the woofer. Bass
sound is not output with some Dolby Pro Logic
modes.
(continued)

Sony SA-W11 Specifications

General

Brand	Sony
Model	SA-W11
Category	Subwoofer
Language	English