Sony SA-W2500 Service Manual

SA-W2500/W3000/W3800
SERVICE MANUAL
SPECIFICATIONS
US Model
Canadian Model
SA-W2500/W3000/W3800
AEP Model
SA-W2500/W3800
UK Model
SA-W2500
E Model
Australian Model
SA-W2500/W3000/W3800
ACTIVE SUBWOOFER
Ver. 1.1 2007.07
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
9-887-592-02
2007G02-1
© 2007.07
photo: SA-W3800
SA-W3800
AUDIO POWER SPECIFICATIONS
For the U.S.A. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, from 20 – 200 Hz; rated 120 W, minimum RMS
power, with no more than 1 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer, (magnetically shielded design)
Speaker unit Woofer : 38 cm dia. (15 in.), cone type
Continuous RMS output South American models
180 W (6 ohms, 80 Hz, 10% THD)
Other models
200 W (6 ohms, 80 Hz, 10% THD)
Reproduction frequency range 20 Hz – 200 Hz
High frequency cut-off frequency 50 Hz – 200 Hz
Phase selector NORMAL, REVERSE
Inputs
Input jacks LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements North American models : 120 V AC, 60 Hz
S outh American models: 120/220/240 V AC,
50/60 Hz
European models : 230 V AC, 50/60 Hz
Australian models : 240 V AC, 50 Hz
Other models: 230 – 240 V AC, 50/60 Hz
Power consumption 100 W
Dimensions Approx. 440 × 495 × 512 mm
(17
3
/
8
× 19
1
/
2
× 20
1
/
8
in.) (w/h/d)
Mass Approx. 23 kg (50 lb 12 oz)
Supplied accessories Foot pads (4)
Audio connecting cord
(1 phono – 1 phono), 2 m (6 ft 6
1
/
2
in.) (1)
SA-W3000
AUDIO POWER SPECIFICATIONS
For the U.S.A. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, from 20 – 200 Hz; rated 100 W, minimum RMS
power, with no more than 1 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer, (magnetically shielded design)
Speaker unit Woofer : 30 cm dia. (11
7
/
8
in.), cone type
Continuous RMS output South American models
160 W (6 ohms, 80 Hz, 10% THD)
Other models
180 W (6 ohms, 80 Hz, 10% THD)
Reproduction frequency range 20 Hz – 200 Hz
High frequency cut-off frequency 50 Hz – 200 Hz
Phase selector NORMAL, REVERSE
Inputs
Input jacks LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements North American models : 120 V AC, 60 Hz
South American models: 120/220/240 V AC,
50/60 Hz
Australian models : 240 V AC, 50 Hz
Korean models: 220 – 230 V AC, 50/60 Hz
Other models: 230 – 240 V AC, 50/60 Hz
Power consumption 100 W
Dimensions Approx. 360 × 425 × 421 mm
(14
1
/
8
× 16
3
/
4
× 16
1
/
2
in.) (w/h/d)
Mass Approx. 16 kg (35 lb 5 oz)
Supplied accessories Foot pads (4)
Audio connecting cord
(1 phono – 1 phono), 2 m (6 ft 6 1/2 in.) (1)
– Continued on next page –

Sony SA-W2500 Specifications

General

frequency response	28Hz-200Hz
woofer size	25cm
power handling	100W
line level input	1 (Rear)
speaker level input	1 (Rear)
power requirements	120V AC, 60Hz
power consumption (in operation)	70W
power consumption (in standby)	less than 0.3W

Weight and Dimensions

weight	10kg
measurements	290 x 350 x 391mm