application on your Android or iOS device. Refer to instructions on the host
application and follow the on-screen instructions.
When you use the host application to enable the camera key, follow the prompt to select
on-screen keyboard settings.
To take pictures with the headset remote
1 If you are using an Android device, press and hold down to open the
Camera application. If you are using an iOS device, open the camera
manually.
2 Press to take a picture.
3 Press
twice to start the self-timer for group photos.
If you are using an Android or iOS device with multiple camera apps, it is recommended to
select the standard camera app when prompted. Other camera apps may not allow you to
use your headset to take photos remotely.
Using Multipoint mode
You can use Multipoint mode to pair your headset with either two Android or two
iOS devices at the same time. When you use your headset to answer an incoming
call, the devices remain connected to your headset after you end the call. Turn o
Multipoint mode manually to switch back to Singlepoint mode.
When you use Multipoint mode, the camera key and Voice Assist features are not available.
To turn on Multipoint mode
1 Turn o your headset.
2 Press and hold down
and at the same time for approximately one
second. Wait until the LED indicator flashes in blue.
3 Pair the Android or iOS devices with your headset.
See
Pairing your headset with an Android or iOS device
on page 7. for details on how to
pair.
To turn o Multipoint mode
1 Turn o your headset.
2 Press and hold down
and at the same time for approximately one
second. Wait until the LED indicator flashes in blue.
When you turn o Multipoint mode, the device which was most recently paired with your
headset remains paired.
10
This is an internet version of this publication. © Print only for private use.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
