34
To send the a JPEG image from particular video
channel, check the appropriate box.
Target
Select the target account for JPEG posting.
Accounts
Four separate accounts can be defined for posting and
recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time
settings of the device have been correctly synchronized.
Account name
Enter an account name to be shown as the target name.
IP address
For an FTP server, enter the IP address.
Login
Enter your login name for the account server.
Password
Enter the password that gives access to the account
server.
Click Check to confirm that it is correct.
Path
Enter an exact path to post the images on the account
server.
Click Browse... to browse to the required path.
Maximum bit rate
Enter the maximum bit rate in kbps that will be allowed
when communicating with the account.
IPv4 Filter
To restrict the range of IP addresses within which you
can actively connect to the device, fill-in an IP address
and mask.
Two ranges can be defined.
• Click Set and confirm to restrict access.
If either of these ranges are set, no IP V6 addresses are
allowed to actively connect to the device.
The device itself may initiate a connection (for example,
to send an alarm) outside the defined ranges if it is
configured to do so.
To Next Page
Loading...
Need help?
General
