Sony SRS-XB100 User Manual

Help Guide
Wireless Speaker
SRS-XB100
Using the voice assist function (Siri)
By using the Siri function that comes with the iPhone, you can speak to the speaker’s microphone to operate the iPhone.
The following shows how to use Siri.
Note
Siri cannot be activated when you say “Hey Siri” through the speaker’s microphone even when the iPhone’s [Listen for “Hey Siri”]
setting is on.
5-048-619-11(1) Copyright 2023 Sony Corporation
Turn on Siri.
On the iPhone, select [Settings] - [Siri & Search] and enable [Listen for “Hey Siri”].
The operation above is an example. For details, refer to the operating instructions supplied with the iPhone.
For details on Siri, refer to the operating instructions or support website of the iPhone.
1
Connect the speaker to the iPhone via a BLUETOOTH connection.
2
While the speaker is connected with the iPhone via a BLUETOOTH connection and the iPhone is in standby
or playing music, press and hold the
(play)/ (call) button for about 2 seconds.
The Siri is activated and you will hear the start-up sound.
3
Make a request to Siri through the speaker’s microphone.
For details on Siri, such as apps which work with Siri, refer to the operating instructions supplied with the iPhone.
4
48

Sony SRS-XB100 Specifications

General

Product type	Mono portable speaker
Product color	Gray
Product design	Cylinder
International Protection (IP) code	IP67
Number of speakers	1
RMS rated power	- W
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	5.3
Bluetooth profiles	A2DP, HFP, AAC, AVRCP, SBC
USB connector type	USB Type-C
Connectivity technology	Wireless
Recommended usage	Universal
Audio formats supported	SBC, AAC
Cables included	USB Type-A to USB Type-C
Battery type	Built-in battery
Battery life (max)	16 h
Power consumption (typical)	2.5 W
Country of origin	China
Harmonized System (HS) code	8519890000
Package depth	128 mm
Package width	96 mm
Package height	98 mm
Package weight	372 g

Weight and Dimensions

Depth	95 mm
Width	76 mm
Weight	274 g