Help Guide
Wireless Speaker
SRS-XB13
Listening to music wirelessly with 2 speakers (Stereo Pair function)
To use the Stereo Pair function, 2 SRS-XB13 speakers are required. By connecting 2 speakers via BLUETOOTH
connection, you can enjoy more powerful sound.
One speaker plays the sound on the left channel (left side), while the other speaker plays the sound on the right channel
(right side) for stereo playback between the speakers.
Note
Before establishing a connection between the speaker and a BLUETOOTH device, turn down the volume of the speaker and the
device or stop music playback on the device to avoid any sudden loud sound output from the speaker.
Place 2 speakers within 1 m (3.2 ft) each other, and then turn on both speakers.
The
(power) indicator lights up.
The
(BLUETOOTH) indicator flashes slowly.
If the BLUETOOTH device which has been connected before is nearby, the speaker may be connected to the
device automatically, and then the
(BLUETOOTH) indicator may be lit. In this case, turn off the BLUETOOTH
function on the BLUETOOTH device or turn off the BLUETOOTH device.
When the speaker has no pairing information, for example when you use the BLUETOOTH function for the first time
after purchase, the
(BLUETOOTH) indicator keeps double flashing in blue.
1
On either one of the speakers, press and hold the
(BLUETOOTH)/ ST PAIR (Stereo Pair) button for
about 3 seconds.
You hear a beep and the
(BLUETOOTH) indicator and the ST PAIR (Stereo Pair) indicator flash. In about 5
seconds, the ST PAIR (Stereo Pair) indicator will stop flashing and stay lit with a beep.
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
