Help Guide
Wireless Speaker
SRS-XB13
Receiving a call
You can enjoy hands-free calls with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile) or HSP (Headset Profile) via BLUETOOTH connection.
If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with
the mobile phone.
About ring tones
When an incoming call arrives, playback pauses and a ring tone will be heard via the speaker.
The ring tone varies in the following ways, depending on your BLUETOOTH mobile phone.
Ring tone set on the speaker
Ring tone set on the BLUETOOTH mobile phone
Ring tone set on the BLUETOOTH mobile phone only for a BLUETOOTH connection
Connect the speaker with a BLUETOOTH mobile phone.
When the BLUETOOTH connection is established, you hear a beep from the speaker and the activity of the
(BLUETOOTH) indicator changes from flashing to lit.
When using the Stereo Pair function
Connect to the speaker in which the
(BLUETOOTH) indicator flashes in blue. In the following steps and
operations during a hands-free call, operate the speaker that is connected to the BLUETOOTH mobile phone.
1
Press the
(play)/ (call) button when a call is received.
Talk into the microphone of the speaker.
When an incoming call arrives, playback pauses and a ring tone is heard from the speaker.
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
