Sony TDM-BT1 User Manual

7
US
Using the unit
Preparation
1 Connect the DIGITAL MEDIA PORT cable of this unit
to the DIGITAL MEDIA PORT jack of a stereo audio
output device (DAV series, etc.). Make sure the output
device is turned off before connecting.
R
E
S
E
T
DMPORT
2 Turn on the stereo output device with a DIGITAL
MEDIA PORT jack (DAV series, etc.) connected to this
unit, and select the DIGITAL MEDIA PORT input.
The LED status indicator lights up for 2 seconds to indicate
“Ready.”
Pairing
What is pairing?
BLUETOOTH devices need to be “paired” with each other beforehand.
Once BLUETOOTH devices are paired, there is no need for pairing
again, except in the following cases:
• Pairing information is deleted after repair, etc.
• This unit can be paired with up to 8 BLUETOOTH stereo audio
source devices. If a new device is paired thereafter, the device with
the oldest registration among the 8 paired devices is replaced by the
new one.
To DIGITAL MEDIA
PORT jack
This unit Stereo audio
output device
OPERATING THE UNIT
Continued

Sony TDM-BT1 Specifications

Power

power requirements	DC 5V
current	0.1 A

Operating Environment

operating distance	30 ft
operating distance in meters	10 m
frequency band	2.4 GHz

Weight and Dimensions

weight	1.77 oz
measurements	1 3/4" x 21/32"
cable length	3 ft