9
Location and Function of Controls
Overview
For details, see “Connecting a
Computer” on page 14 and
“Connecting a VCR” on page 15.
b AC IN socket
Connects the supplied AC power cord.
c AUDIO jack (stereo minijack)
(common INPUT A/B)
To listen to sound output from video
equipment or a computer, connect via
this jack to the audio output of the
computer.
d USB connector (USB plug for
upstream, 4-pin)
Connects to the USB connector of a
computer. When you connect the
projector to the computer, you can
control the mouse function with the
supplied Remote Commander.
e VIDEO IN (Video input)
connector
Connects to external video equipment
such as a VCR.
• S VIDEO (mini DIN 4-pin):
Connects to the S video output (Y/C
video output) of video equipment.
• VIDEO (phono type): Connects to
the composite video output of video
equipment.
• AUDIO (stereo minijack): Connects
to the audio output of the VCR.
f INPUT B connector (HD D-sub
15-pin, female)
Connect to external equipment such as a
computer.
Connects to the monitor output of a
computer using an optional cable.
g RS-232C connector (D-sub 9-
pin, female)
Connects to a computer to operate the
projector from the computer.
h OUTPUT connector
• MONITOR (HD D-sub 15-pin,
female): Connect to the video input
connector of the monitor. Outputs
signals from the selected channel and
computer signals only from among the
signals from the INPUT A or
INPUT B.
• AUDIO (stereo minijack): Connects
to external active speakers. The
volume of the speakers can be
controlled by the VOLUME +/– keys
on the Remote Commander.
When INPUT A or B is selected, the
sound input to the AUDIO connector
which is common for INPUT A/B is
output.
When the “Memory Stick” is selected in
Input-C (VPL-CX86 only), the sound
saved in the “Memory Stick” is output.
When “Air Shot” is selected, no sound is
output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.
To Next Page
Loading...
Need help?
General
