EasyManuals Logo

Sony WH-1000XM5 User Manual

Sony WH-1000XM5
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM5
Low sound quality, or noise or unusual sound can be heard.
Turn down the volume of the connected device if it is too loud.
When playing music, if the headset and the transmitting Bluetooth device are connected via an HFP or HSP
Bluetooth connection, switch the Bluetooth connection to A2DP with the connected device.
Some devices that emit ultrasonic sound waves designed to repel rodents may occasionally be installed at the
entrances of commercial facilities or subway stations. Near such devices, the ultrasonic sound waves may cause
noise or unusual sound to be heard from the headset. Leave the place where the noise or unusual sound is heard.
Or turn off the noise canceling function/Ambient Sound Mode from the “Sony | Headphones Connect” app.
When using a video calling application on a computer, switch the Bluetooth connection to HFP or HSP with the
computer.
During a video call, sound quality may become low due to the conditions of the communication line.
If the headset connects to the previously connected Bluetooth device, the headset may only establish the HFP/HSP
Bluetooth connection when it is turned on. Use the connected device to connect via an A2DP Bluetooth connection.
When listening to music from a computer on the headset, the sound quality may be poor (e.g., difficult to hear the
singer’s voice, etc.) for the first few seconds after a connection is established. This is due to the computer
specifications (priority on stable connection at the start of transmission and then switches to priority on sound quality
several seconds later) and is not a headset malfunction.
If the sound quality does not improve after a few seconds, use the computer to establish an A2DP connection. As for
the operations on your computer, refer to the operating instructions supplied with the computer.
When [Connect to 2 devices simultaneously] is turned on with the “Sony | Headphones Connect” app, LDAC cannot
be used. If you want to use LDAC for music playback, turn [Connect to 2 devices simultaneously] off.
Related Topic
Listening to music from a device via Bluetooth connection
Making a video call on your computer
What you can do with the “Sony | Headphones Connect” app
Connecting the headset to 2 devices simultaneously (multipoint connection)
Supported codecs
5-035-396-11(1)
Copyright 2022 Sony Corporation
131

Table of Contents

Other manuals for Sony WH-1000XM5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony WH-1000XM5 and is the answer not in the manual?

Sony WH-1000XM5 Specifications

General IconGeneral
Cable length1.2 m
Headset typeBinaural
Product typeHeadphones
Product colorSilver, White
Wearing styleHead-band
LED indicatorsCharging, Status
Volume controlTouch
Position sensorYes
Control unit typeOn-ear control unit
Country of originMalaysia
Recommended usageCalls/Music
Wireless range10 m
Bluetooth version5.2
Bluetooth profilesA2DP, HFP, AAC, HSP, AVRCP, SBC, LDAC
Connectivity technologyWired & Wireless
Microphone typeBuilt-in
Microphone direction typeOmnidirectional
Battery typeBuilt-in battery
Charging sourceUSB
Battery capacity1200 mAh
Talk time (ANC on)24 h
Talk time (ANC off)32 h
Battery recharge time3.5 h
Input voltage (earpieces)3.8 V
Continuous audio playback time40 h
Continuous audio playback time (with ANC)30 h
Package depth216.7 mm
Package width75.9 mm
Package height276.2 mm
Battery life2400 min
Weight and Dimensions IconWeight and Dimensions
Weight250 g

Related product manuals