Sony WH-CH400 User Manual

Help Guide
Wireless Stereo Headset
WH-CH400
Connecting to a paired computer (Windows 7)
Before starting the operation, make sure of the following:
Depending on the computer, you need to turn on the built-in Bluetooth adaptor. For whether or not a Bluetooth
adaptor is incorporated, and for how to turn it on, refer to the operating instructions supplied with the computer.
Wake the computer up from sleep mode.
1
Turn on the headset.
Press and hold the
button for about 2 seconds.
Make sure that the indicator (blue) flashes after you release the button. You will hear a voice guidance “Power on”.
After the headset turns on, if it has automatically connected to the last connected device, you will hear a voice
guidance “BLUETOOTH connected”.
Use the computer to check whether the connection is established, and if it is not established, proceed to step 3.
If the computer has connected to the last Bluetooth device connected, disconnect it, then proceed to the next step.
2
Select the headset using the computer.
3
Click the [Start] button, then [Devices and Printers].
1.
Double-click [WH-CH400] of the device.
2.
Click [Listen to Music].
3.
50

Sony WH-CH400 Specifications

General

Driver type	Dynamic
Driver unit	25 mm
Magnet type	Neodymium
Ear coupling	Supraaural
Headphone frequency	20 - 20000 Hz
Cables included	Micro-USB
Bluetooth	Yes
6.35 mm connector	No
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	Wireless
Battery recharge time	4.5 h
Continuous audio playback time	20 h
Microphone direction type	Omnidirectional
Number of products included	1 pc(s)
Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Audio formats supported	AAC, SBC