Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
Note
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform the pairing
again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.
Related Topic
How to make a wireless connection to Bluetooth devices
Pairing and connecting with an iPhone
Listening to music from a device via Bluetooth connection
Disconnecting Bluetooth connection (after use)
5-036-709-11(2)
Copyright 2022 Sony Corporation
Touch the switch to turn on the Bluetooth function.
3.
Touch [WI-C100].
You will hear the voice guidance say, “Bluetooth connected”.
4
To Next Page
Loading...
Need help?
General
