Help Guide
Wireless Stereo Headset
WH-CH520
Connecting to a paired computer (Windows 10)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Turn on the headset.
Press and hold the
(power) button for about 2 seconds or more.
You will hear a notification sound indicating that the headset is turned on.
The indicator (blue) continues to flash even after you release your finger from the button.
If the headset has automatically connected to the last connected device, you will hear a notification sound indicating
that the connection is established.
Check the connection status on the computer. If it is not connected, proceed to step
.
2
Select the headset using the computer.
3
Right-click the speaker icon on the toolbar, then select [Open Sound settings].1.
To Next Page
Loading...
Need help?
General
