LGCY Series Page 25
Chapter IV Installation and Commissioning (Adjustment)
1 Compressor Parking
1.1 The compressor unit must be parked on a level and flat floor. The maximum allowable inclination is
15º.
1.2 If necessary, put a wedge on the bottom to avoid displacement of the air compressor unit;
1.3 To avoid dusty environment, place the compressor in a place that is as clean as possible.
1.4 The operating location of unit must be ventilated and spacious.
1.5 To avoid inhaling hot air, the compressor intake port and the diesel engine exhaust port shall not be
too close to obstacles.
To Next Page
Loading...
Need help?
General
