DocID028599 Rev 7 7/82
UM1974 Product marking
81
2 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be
used as reference design or in production. Any consequences deriving from such usage will
not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference design or in production.
“E” or “ES” marking examples of location:
• On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the STM32 datasheet “Package information” paragraph at the www.st.com
website).
• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on
the board.
This board features a specific STM32 device version which allows the operation of any
stack or library. This STM32 device shows a "U" marking option at the end of the standard
part number and is not available for sales.
3 Ordering information
To order the Nucleo-144 board corresponding to the targeted STM32, use the order code
given below in
Table 1:
The meaning of the NUCLEO-TXXXZY codification is explained in Table 2 with an example:
Table 1. Ordering information
Order code Target STM32
NUCLEO-F207ZG STM32F207ZGT6
NUCLEO-F303ZE STM32F303ZET6
NUCLEO-F412ZG STM32F412ZGT6
NUCLEO-F413ZH STM32F413ZHT6
NUCLEO-F429ZI STM32F429ZIT6
NUCLEO-F439ZI STM32F439ZIT6
NUCLEO-F446ZE STM32F446ZET6
NUCLEO-F722ZE STM32F722ZET6
NUCLEO-F746ZG STM32F746ZGT6
NUCLEO-F756ZG STM32F756ZGT6
NUCLEO-F767ZI STM32F767ZIT6
NUCLEO-H743ZI STM32H743ZIT6
To Next Page
Need help?
General
