a. whenever you leave the machine unattended
or leave the driver'r seat.
b. before removing the jamming cause or un-
clogging the collector channel;
c. before checking, cleaning or working on
machine;
d. after striking a foreign object. Inspect the ma-
chine for damage and make repairs before
restarting and operating the machine;
moving parts have come to a complete
stop):
a. Before refuelling;
b. Every time you remove the grass collector
sack or put it back on;
c. adjusting the cutting height, assuming this
operation cannot be done from the driver’s
seat.
-
-
-
other blades to rotate.
accidents when working with the ma-
chine, stop the engine immediately
and move the machine away to avoid
which are most appropriate to deal with
facility for the necessary treatment.
-
sons or animals if ignored.
The noise and vibration levels shown
excessive speed of movement, or the
-
-
ry to take preventive steps to eliminate
noise and stress from vibration. Main-
tain the machine well, wear ear protec-
tion devices.
3.4 MAINTENANCE AND STORAGE
CAUTION! - Before cleaning or doing
-
-
-
mise the safety of the machine, may
-
-
zed Service Centre, which have the ne-
-
rectly, maintaining the correct degree of
safety and the original operating condi-
by people not having the necessary
-
bility.
• After each use of the machine, remove the key
and check for any damage.
• Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.
Regular maintenance is essential for safety and
for maintaining performance levels.
• Regularly check that the cutting deck blade
screws are securely tightened.
removal and reinstallation operations.
To Next Page
Loading...
Need help?
General
