OPERATING INSTRUCTIONS
For information on the engine and the battery (if sup-
plied), read the relevant owner manuals.
NOTE – The number which precedes each paragraph
links the references in the text to the respective illus-
trations (listed on page iii and following pages).
1. COMPLETE ASSEMBLY
NOTE The machine can be supplied with some parts al-
ready assembled.
WARNING! Unpacking and completing the assem-
bly should be done on a flat and stable surface, with
enough space for moving the machine and its packag-
ing, always making use of suitable equipment.
Disposal of the packaging should be done in accord-
ance with the local regulations in force.
-
1.1 Battery connection
• Electric key ignition models
• Electric push-button ignition models
-
2. CONTROLS DESCRIPTION
NOTE The meanings of the symbols on controls are ex-
plained in the previous pages.
2.1 Throttle lever
Lever positions are indicated on the relevant plate.
a throttle.
2.2 Engine brake lever / cutting means
2.3 Drive lever (where applicable)
-
released.
-
gaged.
WARNING! To prevent damage to the transmis-
sion, do not pull the machine backwards with the trans-
mission engaged.
2.4 Cutting height adjustment
3. GRASS CUTTING
NOTE This machine can be used to mow lawns in a num-
ber of different ways; before starting work, prepare the ma-
chine based on how the lawn is to be mowed.
DO THIS WHEN THE ENGINE IS OFF.
3.1a Preparation for mowing and grass collection
by the grass catcher:
– Lift the rear discharge guard (1) and fasten the grass
3.1b Preparation for mowing and rear discharge
of grass:
-
3.1c Preparation for mowing and
mulching (where applicable)
-
3.1d Preparation for mowing and side discharge of
grass (where applicable)
-
-
-
-
– Release the side discharge chute (8).
– Lift the rear discharge guard (1).
3.2 Engine ignition
-
ual.
3.2a
• Manual ignition models (“I - “II”)
To Next Page
Loading...
Need help?
General
