Stiga SB 28 User Manual

EN
1) Warning! Danger. The failure to use this machi-
ne correctly can be hazardous for oneself and oth-
ers.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise le-
vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Wear gloves and protective footwear!
5) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
c = start
13) Choke
14) Primer
6) Maximum cutting device speed. Only use sui-
table cutting devices.
7) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user to
the danger of very serious or even fatal in-
juries.
8) Warning! Petrol is flammable. Allow engine to
cool at least 2 minutes before refuelling.
9) Warning! Keep away from hot surfaces.
SYMBOLS 3
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
2. SYMBOLS
21) Cutting device
with adequate
protection
22) Cutting device
rotation direction
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
1 2 3 4
5 6 7 8 9
a
11
12
13
14
c
b
21
22

Stiga SB 28 Specifications

General

Brand	Stiga
Model	SB 28
Category	Trimmer
Language	English

Summary

Identification of Main Components

Main Components

Lists and identifies the primary parts of the machine.

Controls and Filling Points

Safety Requirements

Training

Preparation

Key checks and preparations before starting to use the machine.

Operation

Guidelines for safe and correct operation of the machine.

Maintenance and Storage

Procedures for maintaining and safely storing the machine.

Transportation and Handling

Preparing to Work

Preparing the Fuel

Guidance on mixing petrol and oil for the two-stroke engine.

How to Start - Use - Stop the Engine

Starting the Engine

Step-by-step instructions for starting the machine's engine.

Refuelling

Use of the Engine

How to control the cutting speed and use the engine effectively.

Stopping the Engine

Instructions on how to safely shut down the engine.

Using the Machine

Using the Webbing

Choosing the Cutting Device

Working Techniques

Detailed methods for operating the machine for various tasks.

Maintenance and Storage

Cleaning the Air Filter

Checking the Spark Plug

Sharpening the 3 Point Blade

Guidelines for correctly sharpening the 3-point cutting blade.

Storage

Proper procedures for storing the machine after use.

Long Periods of Disuse

Recommended steps before storing the machine for an extended period.

Troubleshooting

Technical Specifications

Maximum Noise and Vibration Levels

Data on noise pressure, sound power, and vibration levels for different models.