EN - 6
G. Toothed chain:
H. Chain restraint pin
I. : device installed
handling, transportation or storage
K. Bar cover guard
4. ASSEMBLY
IMPORTANT The safety regulations to
follow during machine use are described
in Chapter 2. Strictly comply with these
instructions to avoid serious risks or hazards.
Unpacking and completing the assembly
should be done on a at and stable surface,
with enough space for machine handling
and its packaging, always making use of
suitable equipment. Do not use the machine
until all the instructions provided in the
"ASSEMBLY " section have been carried out.
4.1 ASSEMBLY COMPONENTS
Description
Toothed chain
4.1.1
1.
2.
box, including these instructions.
3.
4.
5.
4.2 ASSEMBLY OF THE GUIDE
BAR AND TOOTHED CHAIN
Always wear heavy duty gloves when
handling the bar and chain. Mount the
bar and chain very carefully so as not to
impair the safety and eciency of the
machine. If in doubt, contact your dealer.
Perform all operations
with the engine o.
Before assembling the bar, check that
the chain brake is not engaged (par. 5.7).
1.
2.
3.
4.
the chain runs
5.
on the bar; if it isn’t, turn the chain tension
6.
tightening the nuts.
7.
8. Raise the bar and tighten the guard nuts
To Next Page
Loading...
Need help?
General
