EN - 9
6.2 SAFETY CHECKS
those outlined on the tables.
Always carry out the safety
checks before use.
Always carry out daily inspection before
use and after dropping or other impacts
to identify signicant damage or defect.
6.2.1
Result
Hand grips and guards
traces of oil and
Clean
Electric cables and
6.2.2 Machine operating test
Action Result
The chain (Fig.
is running idle.
Do not use the
machine if the chain
moves when the
engine is running
idle; in this case,
contact your dealer.
Engage the throttle
trigger lever (Fig.
.
not be forced. The
Action Result
Release the throttle
trigger lever (Fig.
.
position, the engine
idle and the chain
Engage the throttle
.
The throttle trigger
.
Press the engine start/
one position to
another
to the start position
CHECKING THE
CHAIN BRAKE
1.
2. Grasp the hand
both hands.
3. Use the throttle
the front hand guard
3.
When the chain has
release the throttle
trigger lever and
disengage the chain
If any of the results fails to match
the instructions provided in the following
table, do not use the machine! Take it
to an Authorised Service Centre to be
checked and repaired if necessary.
6.3 STARTUP
IMPORTANT A label (Fig. 2) is placed on the
machine that summarizes the start up main steps.
The label is a quick guide and it does not
replace the procedures specied below.
1.
2. and
3.
To Next Page
Loading...
Need help?
General
