DANGER!
DANGER! Wear personal
ear protectors.
DANGER! Wear goggles.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.
3.3 IDENTIFICATION LABEL
1. Manufacturer's address
2.
3.
4.
5. Engine's operating rotation speed
6.
7.
8.
9.
10. Article code
IMPORTANT Specify the identication
names on the product identication label.
IMPORTANT Use the identication
names whenever contacting an
Authorised Service Centre
IMPORTANT An example of the
Declaration of Conformity is provided
on the last pages of this manual.
3.4 MAIN COMPONENTS
A. Chassis
B. Dashboard
C. Engine
D.
E. Plug for electrical starting
F. Manual starting grip
G.
H. Discharge chute
I. Paddle
Auger protective cover
K. Auger
L. Levelling shoes
M. Headlights (optional)
N.
O. Auger extension (optional)
4. ASSEMBLY
Unpacking and completing the
assembly should be done on a at and
stable surface, with enough space for
machine handling and its packaging,
always making use of suitable equipment.
Do not use the machine until all the
indications provided in the “ASSEMBLY”
section have been carried out.
IMPORTANT The machine is supplied
without engine oil or fuel.
4.1 ASSEMBLY COMPONENTS
ST 526 S, ST 625, ST 665, ST 665 T, ST 726 T
Pos. Description
A Gear lever 1
B -
C
2
D 2
E Funnel 1
F 1
G Discharge chute 1
H 3 + 3
ST 767 H
Pos. Description
A Gear lever 1
B -
C
2
D Gear lever grip 1
E Funnel 1
F 1
G Discharge chute 1
H 3 + 3
The Auger extension 1
To Next Page
Need help?
General
